JLab GO Air POP user manual (English (2024)

View the manual for the JLab GO Air POP here, for free. This manual comes under the category earphones and has been rated by 20 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the JLab GO Air POP or do you need help?Ask your question here

The JLab GO Air POP is a lightweight earphone weighing 35.4g with binaural earpieces that weigh 3.7g each. It comes with a charging case weighing 27.5g, which provides a charging capacity of 350mAh. The earphone is designed for making calls and listening to music, and it utilizes touch controls. The charging source for this earphone is USB, allowing for convenient and versatile charging options. Its charging case ensures that the earphone is always secure and ready to use. One of the most notable features of the JLab GO Air POP is that it has an International Protection (IP) code of IPX4, which means it is protected against water splashing from any angle. This provides peace of mind to those using the earphone during exercise or in wet weather. In terms of design, the JLab GO Air POP earphone is sleek and modern, making it visually appealing. Its durability is ensured by the use of high-quality materials. Overall, the JLab GO Air POP is an excellent option for those in need of a reliable, lightweight, and waterproof earphone that delivers excellent sound quality for both calls and music listening.

JLab GO Air POP user manual (English (1)
FiletypeUser manual (PDF)
Product colourPink
Product typeHeadphones
Wearing styleIn-ear
Recommended usageCalls/Music
Headset typeBinaural
Control typeTouch
Control unit typeOn-ear control unit
International Protection (IP) codeIPX4
Charging sourceUSB
Battery operatedYes
Battery typeBuilt-in battery
Battery technologyLithium Polymer (LiPo)
Battery capacity43 mAh
Continuous audio playback time32 h
Standby time60 h
Battery recharge time2.2 h
Battery recharge time (charging case)2 h
Weight & dimensions
Weight35.4 g
Left earpiece weight3.7 g
Right earpiece weight3.7 g
Charging case weight27.5 g
Packaging content
Charging caseYes
Charging case capacity350 mAh
Charging case typeWired
Charging case connector typeUSB Type-A
Ports & interfaces
Connectivity technologyTrue Wireless Stereo (TWS)
Bluetooth version5.1
Bluetooth profilesA2DP, AVRCP, HFP, HSP
Wireless range30 m
Ear couplingIntraaural
Headphone frequency20 - 20000 Hz
Impedance16 Ω
Headphone sensitivity103 dB
Driver unit6 mm
Driver typeDynamic
Microphone typeBuilt-in
Microphone sensitivity-42 dB
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the JLab GO Air POP below.

What is the weight of the JLab GO Air POP?

The JLab GO Air POP has a weight of 35.4 g.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can I make hands-free calls with my earphone?

The newer earphones generally have a small microphone built in which allows for calling.

What is noise cancelling?

Noise cancelling ensures that ambient noise is reduced.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

How long does it take to charge the battery of the JLab GO Air POP?

It takes 2.2 h to charge the battery of the JLab GO Air POP.

Why can't I connect my JLab GO Air POP earphones to my device?

Please ensure that both earbuds are removed from the charging case, turned on and not connected to any other devices. Then, activate Bluetooth on your device and search for nearby devices. Finally, select 'JLab GO Air POP' from the list to establish a connection.

How do I control the volume on the JLab GO Air POP earphones?

To increase the volume, double-tap the right earbud. To decrease the volume, double-tap the left earbud. Adjust the volume to your desired level using these controls.

How can I skip or go back to the previous track while using the JLab GO Air POP earphones?

To go to the next track, triple-tap the right earbud. If you want to return to the previous track, triple-tap the left earbud. Use these controls to move through your music or audio content.

The sound quality on my JLab GO Air POP earphones seems poor. What can I do to improve it?

Firstly, make sure the {earbuds} are securely and comfortably seated in your ears. You can try adjusting their position slightly for a better fit. Additionally, ensure there are no obstructions between your device and the {earbuds}, as this can weaken the Bluetooth signal. Finally, cleaning the {earbuds}' speakers and the charging contacts with a dry, soft cloth may help optimize the sound quality.

How do I charge my JLab GO Air POP earphones?

Start by placing each earbud firmly into their corresponding slot in the charging case. Ensure the charging contacts on both the earbuds and the case are clean and free from debris. Close the lid of the case and connect the provided USB cable to a power source. The earbuds will start charging automatically. Keep in mind that it's important to fully charge the earbuds before initial use and when the battery is low for optimal performance.

Is JLab GO Air POP a binaural headset?

Yes, JLab GO Air POP is a binaural headset. This means that it has two earpieces, providing stereo sound and an immersive audio experience.

Does JLab GO Air POP have touch controls?

Yes, JLab GO Air POP has touch controls. This allows for easy navigation and quick access to various functions without the need for physical buttons.

Does JLab GO Air POP have an IPX4 rating?

Yes, JLab GO Air POP has an IPX4 rating, which means it is water-resistant and can withstand splashes of water. This is beneficial for users who want to use the earphones during workouts or in rainy conditions.

Is JLab GO Air POP compatible with True Wireless Stereo (TWS) technology?

Yes, JLab GO Air POP is compatible with True Wireless Stereo (TWS) technology. This allows for a seamless connection between the left and right earphones, providing a synchronized audio experience.

What is the wireless range of JLab GO Air POP?

The wireless range of JLab GO Air POP is 30 meters. This provides users with a generous range of movement, allowing them to enjoy their music or take calls without being restricted by the proximity of their mobile device.

Is the manual of the JLab GO Air POP available in English?

Yes, the manual of the JLab GO Air POP is available in English .

Is your question not listed? Ask your question here

JLab GO Air POP user manual (English (2024)
Top Articles
Latest Posts
Article information

Author: Neely Ledner

Last Updated:

Views: 6182

Rating: 4.1 / 5 (62 voted)

Reviews: 85% of readers found this page helpful

Author information

Name: Neely Ledner

Birthday: 1998-06-09

Address: 443 Barrows Terrace, New Jodyberg, CO 57462-5329

Phone: +2433516856029

Job: Central Legal Facilitator

Hobby: Backpacking, Jogging, Magic, Driving, Macrame, Embroidery, Foraging

Introduction: My name is Neely Ledner, I am a bright, determined, beautiful, adventurous, adventurous, spotless, calm person who loves writing and wants to share my knowledge and understanding with you.